JVC GY-HM100U 사용자 설명서

Applicable to: Video shooting mode

A Full Auto Shooting Mode
M Manual Shooting Mode

During video shooting, diagonal lines (zebra pattern) are 
displayed only at areas with the specified luminance levels. 
You can specify the luminance level range for displaying the 
zebra pattern.

There are two ways to display the zebra pattern.
䡵 Set [ZEBRA] in the [CAMERA PROCESS] menu to [ON].

䡵 Set [USER1], [USER2], or [USER3] in the [CAMERA 

SETTINGS] menu to [ZEBRA], then press the 
corresponding USER button.
Assignment of USER buttons: (A Page 21, 65) 

● A zebra pattern is displayed at the area that corresponds 

to the specified luminance level.

● Between the two methods above, setting via the USER 

button is given a higher priority.

● The zebra pattern is not displayed when in the still picture 

shooting mode.

● When [DISPLAY ON TV] in the [CONNECTION 

SETTINGS] menu is set to [ON], the zebra pattern is 
output on the external monitor. Set [DISPLAY ON TV] to 

[OFF] to clear the display on external monitors.

䡵 Clearing the zebra pattern display

Set the [ZEBRA] menu to [OFF].
Alternatively, press the USER button that is set as 
[ZEBRA].

You can specify the upper limit (

) and lower limit (

) of 

the luminance level range.
This is set to the range of 70 % to 80 % by default.

䡵 Set [ZEBRA] in the [CAMERA PROCESS] menu to 

[THRESHOLD].

● A slide bar for setting the upper limit appears.

Push the Set Lever up or down.

Move along the slide bar by pushing the Set Lever to the left 
or right.

● The display area of the zebra pattern changes.

Press the center of the Set Lever.

● The slide bar disappears.

Zebra Pattern

: Upper Limit Setting
: Lower Limit Setting

M9H7_EN_001D.book  Page 34  Thursday, August 26, 2010  11:51 AM