JVC GY-HM790U 사용자 설명서

* Default values are indicated in bold characters.

Composite

Off

For setting output signals from the [Y/VIDEO]/[PB]/[PR] video signal output terminal (BNC) on 
the side of the camera recorder.
Composite : Outputs composite signals to the [Y/VIDEO] video signal output terminal.
Component : Outputs component signals.
Off

: Signals are not output.

For selecting whether to add a setup signal to the video signal output from the [Y/VIDEO]/[PB]/
[PR] video signal output terminal (BNC) on the side of the camera recorder.
A setup signal can also be selected during signal input from the [IEEE1394] terminal.
7.5%

: Adds setup signal.

0.0%

: Setup signal is not added.

● When [Frame & Bit Rate] is set to A50p (SP)B, A50p (HQ)B, A50i (SP)B, A50i (HQ)B, A25p 

(SP)

B, or A25p (HQ)B, this item appears as A---B and cannot be selected. (A Page 75)

● Depending on the menu settings of the camera recorder and the condition of the cable 

connected to it, the setup signal setting may be fixed at 

A0.0%B. A0.0%B is displayed in gray in 

this case.

HD-SDI

SD-SDI

For specifying whether to output SDI signals from the [HD/SD-SDI] output terminal on the side of 
the camera recorder.
HD-SDI

: Outputs HD-SDI signals. Embedded (superimposed) audio signals and the time 

code are also output.

SD-SDI

: Outputs SD-SDI signals down converted from HD. When [System Definition] in the 

[Record Format] menu is set to 

AHD (MPEG2)B (A Page 75), SD-SDI signals 

down converted from HD are output. Embedded (superimposed) audio signals and 
the time code are also output.

Off

: SDI signals are not output.

● When [System Definition] in the [Record Format] menu is set to ASD (DV)B, AHD-SDIB cannot 

be selected. Only SD-SDI signals are output. (A Page 75)

● When DV signals are input from the [IEEE1394] terminal, AHD-SDIB cannot be selected.

● User’s bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid 

video signals. Therefore, accurate values will not be output.

Side Cut

Squeeze

For setting the style of displaying down-converted images on a 4:3 aspect ratio screen. This 
setting applies to all Composite/SD-SDI/DV outputs.
Side Cut

: Displays image with the left and right sides cut off.

Letter Box : Displays as a wide image with the top and bottom blackened.
Squeeze

: Displays image that is squeezed horizontally.

● When [System Definition] in the [Record Format] menu is set to ASD (DV)B, this item appears 

as 

A---B and cannot be selected. (A Page 75)

On

For selecting whether to display status and menu characters on the screen output from the         
[Y/VIDEO]/[PB]/[PR] video signal output terminal (BNC) on the side of the camera recorder.
On

: Turns on display.

Off

: Turns off display.

● When [Analog Out Char.] is set to AOnB, the details shown on the viewfinder are also 

displayed in the image output from the video signal output terminal (BNC).

On

For selecting whether to display status and menu characters on the screen output from the           
[HD/SD-SDI] output terminal on the side of the camera recorder.
On

: Turns on display.

Off

: Turns off display.