JVC GR-DVM76 사용자 설명서

Master Page: Left

GR-DVM96-76U_02-08.fmPage 8

Automatic Demonstration takes place when “DEMO 
MODE” is set to “ON” (factory-preset).
䡲 Automatic Demonstration starts when there is no 

operation for about 3 minutes after the Power Switch is 
set to “A” or “M” and no cassette is in the camcorder.

䡲 Performing any operation during the demonstration 

stops the demonstration temporarily. If no operation is 
performed for more than 3 minute after that, the 
demonstration will resume.

䡲 “DEMO MODE” remains “ON” even if the camcorder 

power is turned off.

䡲 To cancel Automatic Demonstration:
1) Set the Power Switch to “M” while pressing down the 

Lock Button located on the switch.

2) Open the LCD monitor fully, or pull out the viewfinder 

fully.

3) Press the MENU Wheel in. The Menu Screen appears.
4) Rotate the MENU Wheel to select “s SYSTEM”, and 

press it. The SYSTEM Menu appears.

5) Rotate the MENU Wheel to select “DEMO MODE”, 

and press it. The Sub Menu appears.

6) Rotate the MENU Wheel to select “OFF”, and press it.
7) Rotate the MENU Wheel to select “BRETURN”, and 

press it twice. The normal screen appears.

NOTE:
Detach the lens cap to see the actual changes of the 
Automatic Demonstration activated on the LCD monitor 
or viewfinder.

OFF

M

GR-DVM96-76U_02-08.fm  Page 8  Friday, February 15, 2002  11:26 AM