JVC GR-DVX8 사용자 설명서

 EN

Rewind Button (2)

Fast-Forward Button (3)

Play/Pause Button (4/6)

Stop Button (5)

Load a tape (

 pg. 10).

Set the POWER Switch to “

” while pressing

down the Lock Button located on the switch. To start
playback, press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape

during Stop mode.

.... slide the Power Zoom Lever (VOL.) towards “+” to

turn up the volume, or towards “–” to turn down the
volume.

●

If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the POWER Switch
to “OFF”, then to “

”.

●

The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (

 pg. 38).

●

You can also view the playback picture on the LCD
monitor with it flipped over and pushed against the
camera body.

●

LCD monitor/viewfinder indications:

•

When power is supplied from a battery: the “

”

battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: “

”

does not appear.

•

During Stop mode, none of the indications are
displayed.

●

When a cable is connected to the AV OUT connector,
the sound is not heard from the speaker.

Pauses during playback.

1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.

●

If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●

When 

4

/6

 is pressed, the image may not pause immediately while the camcorder stabilises the still

image.

Allows high-speed search in either direction.

1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.

●

During playback, press and hold 

2

 or 

3

. The search continues as long as you hold the button.

Once you release it, normal playback resumes.

●

A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Allows frame-by-frame search.

1) Engage Still Playback.
2) Rotate the MENU wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse

Frame-By-Frame Playback during Still Playback.

 To resume normal playback, press 4/6.

●

You can also use the provided remote control for Frame-By-Frame Playback (

 pg. 48).

Available only with the remote control (provided) (

 pg. 48, 49).