JVC GR-D390EK 사용자 설명서

Produces the zoom in/out effect, or an 
instantaneous change in image magnification.

Zoom In
Slide the Power Zoom Lever towards “T”.

Zoom Out
Slide the Power Zoom Lever towards “W”.

● The further you slide the Power Zoom Lever, the 

quicker the zoom action. 

● Focusing may become unstable during Zooming. 

In this case, set the zoom while in Record-
Standby, lock the focus by using the manual focus 
(

墌 pg. 37), then zoom in or out in Record mode.

● Zooming is possible to a maximum of 800X, or it 

can be switched to 32X magnification using the 
optical zoom. (

● Zoom magnification of over 32X is done through 

Digital image processing, and is therefore called 
Digital Zoom.

● During Digital zoom, the quality of image may 

suffer.

● Digital zoom cannot be used when the VIDEO/

MEMORY Switch is set to “MEMORY”.

● Macro shooting (as close as approx. 5 cm to the 

subject) is possible when the Power Zoom Lever is 
set all the way to “W”. Also see “TELE MACRO” in 
FUNCTION Menu on page 33.

● When shooting a subject close to the lens, zoom 

out first. If zoomed-in in the auto focus mode, the 
camcorder may automatically zoom out 
depending on the distance between the 
camcorder and the subject. This will not occur 
when “TELE MACRO” is set to “ON”. (

In some situations, 
different shooting 
angles may provide 
more dramatic results. 
Hold the camcorder in 
the desired position 
and tilt the LCD 
monitor in the most 
convenient direction. It 
can rotate 270° (90° 
downward, 180° 
upward).

The person you shoot 
can view himself/herself 
in the LCD monitor, and 
you can even shoot 
yourself while viewing 
your own image in the 
LCD monitor.
1) Open the LCD monitor 
and tilt it upward to 180° 
so that it faces 
forward.Then, pull out the 
viewfinder fully.
2) Point the lens toward 
the subject (yourself when self-recording) and 
start recording.

● During Interface Shooting, the monitor image 

appears inverted as it would when viewing a 
mirror. However, the actual recorded image does 
not appear inverted. 

● If the Quick Review 

pg. 22) is executed during 

the interface- shooting, the LCD monitor will be 
turned off.

● In such a case, check the playback picture in the  

viewfinder. To check the playback picture in  the 
LCD monitor, close the  viewfinder.