JVC GY-HM150E 사용자 설명서
42
Applicable to: Camera mode
If both the slots are loaded with recordable cards in the
factory default ([Slot Mode] is set to
factory default ([Slot Mode] is set to
ASeriesB), pressing the
[REC] button starts recording only to the media in the
selected slot. When the remaining space in the selected
media runs out, recording continues by automatically
activating the media in the other slot.
If both the slots are loaded with recordable cards in the Dual
Rec mode ([Slot Mode] is set to
selected slot. When the remaining space in the selected
media runs out, recording continues by automatically
activating the media in the other slot.
If both the slots are loaded with recordable cards in the Dual
Rec mode ([Slot Mode] is set to
button starts recording simultaneously to the media in both
the slots.
The clips recorded to the media in both the slots are
identical, and two clips of the same content can be created
only on this camera recorder. (
the slots.
The clips recorded to the media in both the slots are
identical, and two clips of the same content can be created
only on this camera recorder. (
Setting to Dual Rec mode
1
ADUALB display appears on the status display screen.
2
Start recording.
● Load recordable media to both slots, and press any of the
[REC] buttons.
● In the Dual Rec mode, recording to the media in both slots
starts at the same time.
● Both the card slot marks turn red, and the status indicators
of both the card slots also blink in green.
3
Stop recording.
● Press the [REC] button again.
● Recording to both slots stops, and both the card slot marks
turn white.
● The same clips are recorded to both cards.
Memo :
● During recording in the Dual Rec mode to two cards with a
different amount of remaining space, if the space of one
card runs out, recording to both slots will stop
automatically. After recording stops, recording
automatically resumes for the card with remaining space.
Although the clips are separated in this case, the clips can
be seamlessly joined by arranging them on the timeline of
the editing software since they are recorded seamlessly.
card runs out, recording to both slots will stop
automatically. After recording stops, recording
automatically resumes for the card with remaining space.
Although the clips are separated in this case, the clips can
be seamlessly joined by arranging them on the timeline of
the editing software since they are recorded seamlessly.
● If the last clip on the cards that are loaded to the two slots
are different from each other, and the time code operating
mode is set to
mode is set to
ARegenB, the Regen mode for the selected
card slot will be enabled in the next recording.
Dual Rec
DC
REC
PUSH
OIIS
SHUTTER
MENU/
THUMB
THUMB
T
W
REC
AE ±
ADJ
./ V
O
L.
PR
OG
R
A
M
A
E
REC / 6
W
A
B
Slot Status Indicator
STATUS 1 Screen
ADUALB Display
STATUS 1 Screen
Lights up in red
STATUS 1 Screen
White
GY-HM150U.book Page 42 Monday, September 5, 2011 1:48 AM