JVC GR-D372U 지침 매뉴얼
MasterPage: Advan_Heading0_Right
24
EN
You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.
Camera for taking snapshots. Still images are
stored in the memory card.
NOTE:
Before continuing, perform the procedures listed
below:
below:
●
●
Loading a Memory Card (
1
Remove the lens cap.
2
Open the LCD monitor fully. (
3
Set the VIDEO/MEMORY Switch to
“MEMORY”.
4
Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
●
To change the Picture Quality,
5
Press SNAPSHOT. The “PHOTO” indication
appears while the snapshot is being taken.
●
To delete unwanted still images, refer to “Deleting
Files”. (
Files”. (
●
When you do not want to hear the shutter sound,
set “MELODY” to “OFF”. (
set “MELODY” to “OFF”. (
NOTE:
If shooting is not performed for approx. 5 minutes
when the Power Switch is set to “REC” and power is
supplied from the battery pack, the camcorder shuts
off automatically to save power. To perform shooting
again, push back and pull out the viewfinder again
or close and re-open the LCD monitor.
when the Power Switch is set to “REC” and power is
supplied from the battery pack, the camcorder shuts
off automatically to save power. To perform shooting
again, push back and pull out the viewfinder again
or close and re-open the LCD monitor.
Approximate Number of Storable Images
●
The number increases or decreases depending
on the Picture Quality/Image Size, etc.
on the Picture Quality/Image Size, etc.
*
Optional
Basic Shooting (D.S.C. Snapshot)
Image Size/Picture
Quality
SD Memory Card*
8 MB 16 MB 32 MB 64 MB
640 x 480/FINE
47
95
205
425
640 x 480/STANDARD
160
295
625 1285
Image Size/Picture
Quality
MultiMediaCard*
8 MB
16 MB 32 MB
640 x 480/FINE
55
105
215
640 x 480/STANDARD
190
320
645
Power Switch
Lock Button
VIDEO/
MEMORY
SNAPSHOT
Images shot with the camcorder are
automatically numbered, then stored in
numerical order in the memory card. You can
view the stored images, one at a time, much like
flipping through a photo album.
automatically numbered, then stored in
numerical order in the memory card. You can
view the stored images, one at a time, much like
flipping through a photo album.
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to
“MEMORY”.
3
Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
switch.
●
A stored image is displayed.
4
Press
1
to display the previous file. Press
2
to
display the next file.
NOTE:
Images shot and stored on the card with another
device with resolutions other than “640 x 480” will
be displayed as thumbnails only. These thumbnail
images cannot be transferred to a PC.
device with resolutions other than “640 x 480” will
be displayed as thumbnails only. These thumbnail
images cannot be transferred to a PC.
Normal Playback Of Images
Power Switch
Lock Button
7
6
2
2
2
2
1
1
1
1
MENU
VIDEO/
MEMORY
MEMORY
D.S.C. RECORDING
D.S.C. PLAYBACK
GR-D372US_EN.book Page 24 Friday, April 14, 2006 12:28 PM