JVC GR-DF550 사용자 설명서

VIDEO PLAYBACK

MasterPage: Left

NOTES:

● It is recommended to use the AC Adapter as

the power supply instead of the battery pack.
(

● To monitor the picture and sound from the

camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “A” or
“M”, then set your TV to the appropriate input
mode.

● Make sure you adjust the TV sound volume to its

minimum level to avoid a sudden burst of sound
when the camcorder is turned on.

The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(

墌 pg. 25)

Installing The Battery

The remote control uses
one lithium battery
(CR2025).

Pull out the battery

holder by pushing the lock
tab.

Insert the battery in the

holder, and be sure to
have the “+” mark visible.

Slide the holder back in until you hear a click.

Beam Effective Area (indoor use)

When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5 m. (16 ft)

NOTE:

The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.

Buttons And Functions

Infrared beam transmitting window

● Transmits the beam signal.

The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.

PAUSE Button

● Pauses the tape (墌 pg. 25)

Up Button (

墌 pg. 26)

SLOW Rewind Button (

墌 pg. 25)

REW Button

● Rewind/Reverse Shuttle Search on a tape