JVC GR-D370E 사용자 설명서

LED Light can be used to 
brighten the subject in the dark 
place during video recording or 
D.S.C. shooting.

Press LIGHT repeatedly to 

change the setting.

OFF: Turns off the light.
ON: The light is on always. (

 appears.)

AUTO: The light turns on automatically when 
dark. (

 appears.)

Press the Recording Start/Stop Button to 

start video recording or SNAPSHOT to shoot a 
still image.

● Be careful not to point the LED Light directly to 

eyes.

● If the light does not reach the subject when the 

LED Light setting is “ON”, the Night-Scope 
function will be activated, and makes it possible to 
shoot the subject brighter.

● There is a difference in the brightness of the 

images shot between the centre area which is 
illuminated by the LED Light and the surrounding 
areas (which will be darker).

● Since subjects are shot at a reduced shutter 

speed when the LED Light setting is “ON”, they 
will appear slightly blurred.

This feature is useful for recording or playing 
back precious or hard-to-see moments at a slow 
speed. Sound is recorded and played back in 
real time.

Set the VIDEO/MEMORY Switch to “VIDEO”.

Set the recording mode to “M”

.

Select “

”and set “SNAP/SLOW” to 

“SLOW”. (

墌 pg. 32, 33) The Live Slow indicator 

“

” appears.

Press SNAPSHOT (SLOW) during recording 

or playback.

● The moving pictures are divided into four 

frames. They are recorded or played back for 
1.5 seconds, and then normal recording or 
playback resumes

● This feature is effective when the recording 

mode selection is set to both 

“A

”

 or “M

”

.

Available only when the VIDEO/MEMORY Switch  is 
set to“VIDEO”

This camcorder allows you to choose the type of 
image output format for recording.
[  ] = Factory-preset

Set the Power Switch to 

“REC”

.

Press 16:9 button repeatedly to choose your 

selection.

[4:3]: Records with no change in the screen 
ratio. For playback on a TV with a normal screen 
ratio.  When using this mode on a TV with a 
normal screen ratio, refer to your TV’s instruction 
manual.

: For playback on TVs with an aspect ratio of 

16:9. Naturally expands the image to fit the 
screen without distortion. The 16:9 indicator 
appears. When using this mode, refer to your 
wide-screen TV’s instruction manual. During 
playback/recording on 4:3 TVs/LCD monitor/
viewfinder, select “4:3TV” in “16:9” 
(

墌 pg. 34, 35) to prevent vertical elongated 

image.

● Available only when the 

 

Switch  is set to

“VIDEO”.

● Still images are recorded at 4:3 mode. They 

cannot be recorded at 16:9 mode.