JVC 1105ASR-NF-VM 사용자 설명서

MasterPage: Left

While using the LCD monitor:
Make sure the viewfinder is pushed back in. Pull 
on the end 

A of the LCD monitor and open the 

LCD monitor fully. It can rotate 270° (90° 
downward, 180° upward). 

While using the viewfinder:
Make sure the LCD monitor is closed and 
locked. Pull out the viewfinder fully.

● The image will not appear simultaneously on the 

LCD monitor and the viewfinder. When the 
viewfinder is pulled out while the LCD monitor is 
opened, you can select which one to use. Set 
“PRIORITY” to the desired mode in SYSTEM 
Menu. (

● Colored bright spots may appear all over the LCD 

monitor or the viewfinder. However, this is not a 
malfunction. (

Produces the zoom in/out effect, or an 
instantaneous change in image magnification.

Zoom In
Slide the Power Zoom Lever towards “T”.

Zoom Out
Slide the Power Zoom Lever towards “W”.

● The further you slide the Power Zoom Lever, the 

quicker the zoom action.

 

● Focusing may become unstable during Zooming. 

In this case, set the zoom while in Record-
Standby, lock the focus by using the manual focus 
(

 pg. 27), then zoom in or out in Record mode.

● Zooming is possible to a maximum of 800X, or it 

can be switched to 32X magnification using the 
optical zoom. (

● Zoom magnification of over 32X is done through 

Digital image processing, and is therefore called 
Digital Zoom.

● During Digital zoom, the quality of image may 

suffer.

● Macro shooting (as close as approx. 5 cm (2") to 

the subject) is possible when the Power Zoom 
Lever is set all the way to “W”. Also see “TELE 
MACRO” in FUNCTION Menu on page 23.

● When shooting a subject close to the lens, zoom 

out first. If zoomed-in in the auto focus mode, the 
camcorder may automatically zoom out 
depending on the distance between the 
camcorder and the subject. This will not occur 
when “TELE MACRO” is set to “ON”. (

GR-D350UC.book  Page 18  Wednesday, October 19, 2005  1:51 PM