Nikon S3100 사용자 설명서

Shooting Smiling Faces (Smart Portrait Mode)

More on 

Sh
ooting

While using F (smart portrait) mode (

A 66), press the d button (A 10) and 

then set the following options in the smart portrait menu.

Use the multi selector to choose and apply settings (

Press the 

d button to exit the menu.

Image mode

Choose the image mode (combination of image size and compression rate) at 
which images are saved (

Changes made to the image mode setting are applied to all shooting modes.

Skin softening

Enable skin softening. When the shutter is released, the camera detects one or more 
human faces (up to three), and processes the image to soften facial skin tones 
before saving the picture. 
The degree of skin softening applied can be selected from 

High, Normal (default 

setting), and 

Low. When Off is selected, the skin softening function is disabled.

• The current setting can be confirmed by the indicator displayed in the monitor 

with shooting (

A 6). No indicator is displayed when 

Off is selected. The effects 

of skin softening are not visible when framing pictures for shooting. Check the 
degree of skin softening performed in playback mode.

Smile timer

• On (default setting): The camera uses face detection to detect a human face, and 

then automatically releases the shutter whenever a smile is detected.

• Off: The camera does not release the shutter automatically with smile detection. 

Press the shutter-release button to take a picture.

• When smile timer is enabled, an indicator is displayed in the monitor with 

shooting (

A 6). No indicator is displayed when 

Off is selected

Blink proof

When 

On is selected, the camera automatically releases the shutter twice each time 

a picture is taken. Of the two shots, one in which the subject’s eyes are open is 
saved.
• If the camera saved a picture in which the subject’s 

eyes may have been closed, the dialog shown at 
right is displayed for a few seconds.

• Flash cannot be used when On is selected.
• The default setting is Off.
• The current setting is displayed in the monitor 

A 6). No indicator is displayed when 

Off is 

selected.

A blink was detected in the
picture just taken.