Fujifilm REAL 3D W1 사용자 설명서

The battery is not charged at shipment.  Charge the battery before use.

  Connect the AC power adapter.

Connect the supplied AC power adapter to 
the camera as shown.

2  Tips: Using an AC power adapter
•  The AC power adapter can also be used to power the 

camera.  Use to prevent unexpected loss of power 
during extended playback or when the camera is 
connected to a computer or TV.

• If the camera is powered by an AC power adapter, 

demo mode slides will be displayed when the cam-
era is turned on.  Demo mode can be disabled using 
the 

s DEMO MODE option in the setup menu (pg. 

81).

  Plug the adapter in.

Plug the AC power adapter into a power out-
let.  The indicator lamp will glow red while 
the battery charges (if the indicator lamp 
does not light, check that the battery is cor-
rectly inserted).  Charging is complete when 
the lamp turns off .

The indicator lamp shows battery charge status as 
follows:

On (red)

Battery charging

Off 

Battery fully charged

Blinks (red)

Battery fault

The indicator lamp also shows focus, fl ash, exposure, 
and recording status (pg. 17).