Fujifilm FinePix A500 사용자 설명서

105

The table below lists the warnings that are displayed on the LCD monitor.

C (Lit red)

V (Blinking red)

The batteries are low or completely out of charge.

Load new or fully charged batteries.

|

There is a strong likelihood of camera shake 
because the shutter speed is slow.

Use flash photography. A tripod may be 
recommended, depending on the scene and mode.

{

The AF (autofocus) cannot work effectively.

• If the image is too dark, take the picture at a 

distance of around 2 m (6.6 ft.) from the subject.

• Use AF lock to take the picture (

➝p.30).

}

The camera cannot shoot the picture at the correct 
brightness due to too bright or dark shooting 
condition.

The picture can be taken, but the correct brightness 
(exposure) will not be obtained.

Camera malfunction or fault.

• Turn the camera on again, taking care not to touch 

the lens.

• Turn the camera off and on again. If the message 

still appears, contact your FUJIFILM dealer.

xD-Picture Card is not inserted when transferring 
images. 

Insert an xD-Picture Card.

• The xD-Picture Card or internal memory is not 

formatted.

• The xD-Picture Card contact area is soiled.

• Format the xD-Picture Card or internal memory 

on the camera (

➝p.75).

• Wipe the contact area on the xD-Picture Card 

with a soft, dry cloth. It may be necessary to format 
the xD-Picture Card (

➝p.75). If the message still 

appears, replace the xD-Picture Card.

• Camera fault.

• Contact your FUJIFILM dealer.

• The xD-Picture Card contact area is soiled.
• The xD-Picture Card format is incorrect.

• Wipe the contact area on the xD-Picture Card 

with a soft, dry cloth. It may be necessary to format 
the xD-Picture Card (

➝p.75). If the message still 

appears, replace the xD-Picture Card.

• Camera fault.
• The xD-Picture Card is damaged.

• Contact your FUJIFILM dealer.

Continued