Fujifilm FinePix A500 사용자 설명서

107

\ NO IMAGE

Y NO IMAGE

An attempt was made to transfer images from the 
xD-Picture card or internal memory that memory 
was empty.

It is impossible to copy.

` CAN NOT TRIM

An attempt was made to trim a 0.3M image.

The image cannot be trimmed.

• An attempt was made to trim an image shot using 

a camera other than FinePix A400 / FinePix A500.

• The image is damaged.

The image cannot be trimmed.

Prints were specified for 1000 or more frames in the 
DPOF frame settings.

The maximum number of frames for which prints can 
be specified on the same xD-Picture Card is 999.
Copy the images for which you want to order prints 
onto another xD-Picture Card and then specify the 
DPOF settings.

r CAN NOT SET DPOF

An attempt was made to specify DPOF settings for 
an image that is not supported by DPOF.

DPOF printing cannot be used with this image 
format.

The camera is not connected to a PC or printer.

• Check that the USB cable (mini-B) is connected 

correctly.

• Check that your printer is turned on.

Displayed for PictBridge.

• Check that the printer is not out of paper or out of 

ink.

• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your 

printer.

Displayed for PictBridge.

Check that the printer is not out of paper or out of ink. 
Printing automatically restarts when the error is 
cleared. If the message still appears after checking, 
press MENU/OK to restart printing.

Continued