Fujifilm FinePix A500 사용자 설명서

111

Z Shooting

Flash

Cannot use the 
flash.

The shutter button was pressed while the 
flash was charging.

Wait until the charging is completed before 
pressing the shutter button.

44

The Shooting mode is set to ,.

Change the Shooting mode.

40

The batteries have run out.

Load new or fully charged batteries.

15, 

17, 99

The flash settings 
are restricted and 
cannot be 
selected.

The Shooting mode is set to a, ,, ., 
or 8.

The flash settings are restricted because 
the camera settings are tailored to the 
scene being shot. Change the Shooting 
mode for a wider range of flash settings.

40

The playback 
image is dark 
even though the 
flash was used.

The subject is too far away.

Move to within the effective flash range 
before taking the picture.

42, 44

Your finger was covering the flash.

Hold the camera correctly.

26, 29

Photographed images

The image is 
blurred.

The lens is dirty.

Clean the lens.

98

{ appeared when taking pictures.

Check the focus on the subject and take 
pictures.

27, 
30, 

105

| appeared when taking pictures.

It may cause camera shake. Hold the 
camera steadily.

28, 

105

There is speckling 
on the image.

The picture was taken with a slow shutter 
speed (long exposure) in a high-
temperature environment.

This is a characteristic of CCDs and does 
not indicate a camera fault.

—

Recording images

Photographed 
images or movies 
are not recorded.

AC power adapter was connected or 
disconnected during turning the camera 
on.

Connect or disconnect the AC power 
adapter only when the camera is off. 
Failing to turn the camera off first can 
result in damage to the xD-Picture Card 
or malfunctions during PC connection.

90, 

101

Continued