Fujifilm FinePix A500 사용자 설명서

91

I Set a PC

• FinePixViewer automatically starts up and the Save 

Image Wizard window (Save Image dialog box) 
appears. Follow the instructions provided on screen to 
save the images. To proceed without saving the 
images, click the [Cancel] button.

• A removable disk icon appears and you can use your 

PC to transfer files to and from the camera.

If “CHECKING USB” appears and then 
[COMMUNICATION ERROR] is displayed on the LCD 
monitor, @ DSC is not selected in USB MODE. 
Disconnect the USB cable (mini-B) to the camera and 
restart the procedure from step C.

• Always use the FUJIFILM AC Power Adapter AC-3VX 

(sold separately). If the camera suddenly loses power 
during data exchange, the xD-Picture Card or internal 
memory could be damaged.

• Do not disconnect the USB cable (mini-B) when the 

camera is communicating with a PC. If disconnecting the 
USB cable (mini-B) during communication, the files on 
the xD-Picture Card or internal memory may cause 
damage.

• In Mac OS X, you must set the automatic setup when the 

first time you connect the camera to your PC.

• Make sure that USB cable (mini-B) is connected 

correctly and pushed in.

• Perform pre-arranged steps to disconnect and turn off 

the camera (

➝p.92).

• When the camera and PC are exchanging data, the self-

timer lamp blinks and the viewfinder lamp blinks orange.

• Auto power off is disabled during USB connection.
• Before replacing the xD-Picture Card, always 

disconnect the camera from the PC. See p.92 for 
information on the disconnection procedure.

• The camera and PC may be exchanging data even 

when “Copying” disappears on your PC screen. Before 
disconnecting the USB cable (mini-B), always check that 
the viewfinder lamp lights green.

The Windows CD-ROM may also be required during 
installation. In this event, change CD-ROMs as directed by 
the on-screen instructions.

*

Screen for Windows 98 SE