JVC GR-D371U 사용자 설명서

MasterPage: Start_Right

●

Appears if Insert Editing is attempted on a 
tape recorded in the LP mode. (

●

Appears if INSERT (

) on the remote control 

is pressed when the erase protection tab is set 
to “SAVE”. (

●

Appears if Insert Editing is attempted on a 
blank portion of a tape. (

Appears when the memory card’s memory is full 
and shooting is not possible.

Appears when pictures recorded in the HDV 
format are detected. The pictures in the HDV 
format cannot be played back with this 
camcorder.

Appears when playing back a file that is not 
compatible with DCF or a file with a size that is 
not compatible with this camcorder.

Appears if dubbing of copyguarded signals is 
attempted while this camcorder is being used as 
a recorder.

Appears if there is no memory card loaded when 
the SNAPSHOT Button is pressed  while the 
Power Switch is set to “REC” and the VIDEO/
MEMORY Switch is set to “MEMORY”.   

Appears when there is a problem with a memory 
card and its memory is corrupt, or it has not 
been initialized. Initialize the memory card. 
(

Appears if there are no image files stored in the 
memory card when you attempt memory card 
playback. 

Appears when the camcorder does not 
recognize the loaded memory card. Remove the 
memory card once and insert it again. Repeat 
these procedures until no indication appears. If 
the indication still appears, the memory card is 
corrupted.

Appears when you attempt to shoot digital still 
images when the write protection tab on the SD 
Memory Card is set to the “LOCK” position.

The error indications (01, 02 or 06) show what 
type of malfunction has occured. When an error 
indication appears, the camcorder turns off 
automatically. Remove the power supply 
(battery, etc.) and wait a few minutes for the 
indication to clear. When it does, you can 
resume using the camcorder. If the indication 
remains, consult your nearest JVC dealer. 

The error indications (03 or 04) show what type 
of malfunction has occured. When an error 
indication appears, the camcorder turns off 
automatically. Eject the cassette once and re-
insert it, then check if the indication clears. 
When it does, you can resume using the 
camcorder. If the indication remains, consult 
your nearest JVC dealer.

GR-D371US.book  Page 49  Tuesday, August 29, 2006  9:02 AM