JVC GR-DV400 사용자 설명서
46
EN
Master Page: Left
The Navigation Function helps you check tape
contents by making thumbnail images on a memory
card.
contents by making thumbnail images on a memory
card.
To make thumbnail images during video
recording automatically
1
recording automatically
1
Load a cassette. (
2
Load a memory card. (
3
Set the VIDEO/MEMORY Switch to “VIDEO”.
4
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
pressing down the Lock Button located on the
switch.
5
Set “NAVIGATION” to the desired navigation
storing time. (
storing time. (
● If the “
” indicator appears blinking on the
screen, wait until it stops blinking. If it does not
stop blinking after a while, check if a memory
card is loaded.
stop blinking after a while, check if a memory
card is loaded.
6
Press the Recording Start/Stop Button to start
recording.
recording.
● When the recording time
is over the navigation
time set in step 5, “
time set in step 5, “
”
appears briefly, then the
image of the point where
recording is started is
captured and stored in
the memory card as a
thumbnail image.
image of the point where
recording is started is
captured and stored in
the memory card as a
thumbnail image.
● If the Recording Start/
Stop button is pressed
before “
before “
” stops
blinking, the image of the
point where the loaded memory card is
recognised is captured.
recognised is captured.
7
Press the Recording Start/Stop Button to stop
recording.
recording.
To make thumbnail images after video recording
manually...
1) Perform steps 1 to 4 above.
2) Set “NAVIGATION” to “MANUAL”.
manually...
1) Perform steps 1 to 4 above.
2) Set “NAVIGATION” to “MANUAL”.
3) After the recording, press NAVI STORE.
•The “
” indicator appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
a thumbnail image.
NOTES:
● The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If “REC SELECT” is set to “
10 or less. If “REC SELECT” is set to “
/
”
in DSC Menu, the number shows how many
640 x 480 pixel images can be stored.
640 x 480 pixel images can be stored.
● If “5S” is set to “5S” or “Anim.” in MANUAL
Menu, the NAVIGATION function will not work
properly.
properly.
To find scenes on tape using thumbnail images
(NAVIGATION Search)
1
(NAVIGATION Search)
1
Load a cassette. (
2
Load a memory card. (
3
Set the VIDEO/MEMORY switch to “VIDEO”.
4
Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
down the Lock Button located on the switch.
5
Press NAVI during video playback or stop mode.
● The loaded cassette’s
NAVIGATION thumbnail
image screen appears.
image screen appears.
● Press 3 to display the
previous page. Press 5
to display the next page.
to display the next page.
6
Rotate the MENU Wheel to select the desired
image, and press it.
image, and press it.
● The “NAVIGATION SEARCH” indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
searching the tape for the relevant point of the
selected thumbnail image.
To cancel NAVIGATION search midway...
Press 4/9, 3, 5 or 8.
Press 4/9, 3, 5 or 8.
NAVIGATION Function
Power Switch
MENU Wheel
VIDEO/MEMORY Switch
Lock Button
NAVI STORE Button
NAVI Button
Fast-Forward Button (5)
Rewind Button (3)
PAUSE
PAUSE
PAUSE
1h
m
1h
m
1
0
0
Displayed while the
captured image is
being stored in the
memory card.
TC
: 1 3 : 2 3 : 1 5
3
5
2
.
4
DATE : 2
:
’
3
0
:
3
2 9
ON
I
T
NAV I GA
1
2
3
4
5
006
GR-DV700PAL_07Advanced.fm Page 46 Saturday, February 22, 2003 2:48 PM