JVC GR-DV801 사용자 설명서

Master Page: Left-Heading0

Adjust the velcro strip.

Pass your right hand through the loop and grasp 
the grip.

Adjust your thumb and fingers through the grip to 
easily operate the Recording Start/Stop Button, 
Power Switch and Power Zoom Lever. Be sure to 
fasten the velcro strip to your preference. 

Set the Power Switch to “A” or “M” while 
pressing down the Lock Button located on the 
switch.

Pull out the viewfinder fully and adjust it 
manually for best viewability.

Turn the Diopter Adjustment Control until the 
indications in the viewfinder are clearly focused.

To attach the camcorder to a tripod, align the 
direction stud and screw to the mounting socket and 
stud hole on the camcorder. Then tighten the screw 
clockwise.

● Some tripods are not equipped with studs. 

While using the LCD monitor:
Make sure the viewfinder is pushed back in. Press 
PUSH OPEN and open the LCD monitor fully. It can 
rotate 270º (90º downward, 180º upward).

While using the viewfinder:
Make sure the LCD monitor is closed and locked. 
Pull out the viewfinder fully.

● Be sure to pull out the viewfinder until you hear a 

click, otherwise it may be pushed back in during 
use.

● The image will not appear simultaneously on the 

● Colored bright spots may appear all over the LCD 

CAUTION:
When attaching the camcorder to a tripod, extend 
its legs to stabilize the camcorder. It is not advised 
to use small sized tripods. This may cause damage 
to the unit by falling over.

GR-DV801US.book  Page 12  Wednesday, January 22, 2003  5:39 PM