JVC GR-D239 사용자 설명서

MasterPage: Start_Right

Follow the illustration.

Thread the strap through the eyelet.

Fold it back and thread it through the strap 

guide and the buckle.

● To adjust the length of the strap, loosen and then 

tighten the strap in the buckle.

Slide the strap guide fully towards the eyelet.

This camcorder’s 2-way power supply system 
lets you choose the most appropriate source of 
power. Do not use provided power supply units 
with other equipment.

Set the Power Switch to “OFF”.

With the arrow on the battery pack pointing 

downward, push the battery pack slightly against 
the battery pack mount 

a.

Slide down the battery pack until it locks in 

place

b.

Connect the AC Adapter to the camcorder.

Connect the Power Cord to the AC Adapter. 

(AP-V14E only)

Plug the AC Adapter into an AC outlet. The 

POWER/CHARGE lamp on the camcorder 
blinks to indicate charging has started.

When the POWER/CHARGE lamp goes out, 

charging is finished. Unplug the AC Adapter 
from the AC outlet. Disconnect the AC Adapter 
from the camcorder.

M

A

)

GR-D239PAL_04Start.fm  Page 11  Tuesday, May 10, 2005  9:09 AM