JVC GR-D239 사용자 설명서

MasterPage: Start_Right

Backlight compensation brightens the subject 
quickly.
With simple operation, backlight compensation 
feature brightens the dark subject portion by 
increasing the exposure.

Set the Power Switch to “M”.

Press BACK LIGHT so that the Backlight 

Compensation indicator “

” appears.

To cancel Backlight Compensation
Press BACK LIGHT twice so that the “

” 

indicator disappears.

Using Backlight Compensation may cause the light 
around the subject to become too bright and the 
subject to become white. 

Selection of a spot metering area enables more 
precise exposure compensation. You can select 
one of the three metering areas on the LCD 
monitor/viewfinder.

Set the Power Switch to “M”.

Press BACK LIGHT twice so that the Spot 

Exposure Control indicator “

” appears.

● A spot metering area frame appears at the 

centre of the LCD monitor/viewfinder.

Press + or – to select the desired spot 

metering area frame.

Press MENU.

● Spot Exposure Control is engaged.

● Exposure is adjusted to make the brightness of 

the selected area most appropriate.

After step 

3, press and hold MENU over 2 

seconds. The “

” indication appears and the 

iris is locked.

Press BACK LIGHT once so that the “

” 

indicator disappears.

● You cannot use the Spot Exposure Control at the 

same time with following functions.
• “SQUEEZE” in “WIDE MODE” (

• “STROBE” in “PROGRAM AE” (

• Digital Zoom (

• Manual Exposure Control

● Depending on the shooting location and condition, 

optimum result may not be attained. 

GR-D239PAL.book  Page 31  Friday, April 22, 2005  11:25 AM