Sigma LBA-708 사용자 설명서

 

 

Figure 33 

 
Note:  Whenever you do a Soft Zoom while in 3D mode, the Wire Density will go to the highest resolution value 
possible, based upon the camera resolution setting.  For example, if your camera resolution is 256x240, and your 
Wire Frame setting is 64x60, the first time you Soft Zoom into the image the wire frame resolution will change to 
128x120. 
 

You can select which functions you want to appear on the Display Toolbar by checking the desired 

item.  The functions will appear on the toolbar in the same order that they are listed in this dialog 
box.   
 
The three toolbar.panels contain most of the items listed in the Beam Display dialog box.  Cursor 

Profiles and Display Thresholds are not available on the toolbar.  The 3D Rotate and Tilt edit 

controls will appear as scroll bars in a dedicated Rotate and Tilt window.   

 

This program collects centroid and peak data from the LBA-PC and displays it graphically.  The 

graphics that are displayed are as follows: 

•  A strip chart that collects the following data vs. time.  Centroid X and Y, Peak X and Y, and 

centroid radius from an origin or from the mean centroid. 

•  A peak location scatter plot with histogram color-coding 
•  A centroid location scatter plot with histogram color-coding 

Click on the Options menu item and then click Launch Beam Stability… to start the beam stability 
program.  This will open up a new window with the beam stability program that looks like the window 

below: 
 
 

Operator’s Manual 

 

LBA-PC 

 

Doc. No. 10654-001, Rev 4.10 

85