SeaLife DC800 사용자 설명서
Captur
e Mode
>>
19
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.7” full color TFT LCD monitor to help you
compose images, playback recorded images/video clips or adjust menu
settings.
1. Press the
compose images, playback recorded images/video clips or adjust menu
settings.
1. Press the
ON/OFF button to turn the power on.
The status LED lights green and the camera is initiated.
When the power is turned on, the camera will start in the mode that
was last set.
was last set.
If the power is turned on in [
] or [
] mode, the lens will extend
forward and it is ready for shooting. In both modes, if the mode switch
is set to [
is set to [
], the lens barrel will retract into the camera body after 30
seconds.
If the power is turned on in [
] mode, the lens will remain closed.
2. Slide the mode switch to [
].
3. Compose your image in the LCD monitor.
Pressing the button zooms in on the subject, and enlarges the subject
on the LCD monitor.
on the LCD monitor.
Pressing the
button provides a wider angle image.
4. Press the shutter button.
Pressing the shutter button down
halfway automatically focuses and
adjusts the exposure, and pressing the
shutter button down fully captures the
images.
halfway automatically focuses and
adjusts the exposure, and pressing the
shutter button down fully captures the
images.
The focus area frame turns green
when the camera is in focus and the
exposure is calculated.
when the camera is in focus and the
exposure is calculated.
When the focus or exposure is not
suitable, the frame of the focus area turns red.
suitable, the frame of the focus area turns red.
a
b