Pentax S5Z 전단

1

3 button.

2

Press the four-way controller (5) to display the [H Setting] menu.

3

Use the four-way controller (23) to select [USB 
Connection].

4

Press the four-way controller (5).

A pop-up menu appears.

5

Use the four-way controller (23) to select [PC].

6

If you connect your computer to the camera and as the power is switched on, the camera will 
be recognized automatically. You can transfer an image to your computer after ACDSee 
Device Searching display appears on the screen.

1

2

3

The ACDSee Device Detector screen appears automatically.
If the ACDSee Device Detector screen does not appear, display and copy the images 
following the steps in “When the ACDSee Device Detector screen does not appear”.

4

5

6

7

The image is copied to the PC.

8

The ACDSee for PENTAX 2.0 Browser starts.

4

5

6

7

Images are stored in folder [xxxPENTX], where “xxx” is a three-
digit folder number. 

8

Hold the [Ctrl] key on the keyboard while clicking on the folders in 
which the images you want to copy are stored.

9

The Copy Files screen appears.

10

11

The image is copied to the PC.

1

The Safely Remove Hardware screen appears.

2

The [Stop a Hardware device] screen appears.

3

A message appears to indicate that the hardware can be safely 
removed.

4

1

The Unplug or Eject Hardware screen appears.

2

The Stop a Hardware device screen appears.

3

A message appears indicating that the hardware can be safely 
removed.

4

5

• Do not connect the camera to your PC while [PictBridge] is selected for the USB 

Connection mode.

• Do not connect the camera to your printer while [PC] is selected for the USB Connection 

mode.

• If the digital camera is connected to your PC in [PictBridge] USB Connection mode, the 

images cannot be transferred. Disconnect the USB cable from your camera and PC, 
follow the instructions in “Setting Up Your Digital Camera” to set the USB Connection 
mode to [PC], and then reconnect the USB cable.

• We recommend using an AC Adapter D-AC8 (optional) when connecting your camera to 

your computer. Your image data could be corrupted if your batteries run out during image 
transfer.

• While communicating with your computer via a USB cable, the status lamp blinks green.
• If there is no SD Memory Card in the camera, the images stored in the built-in memory 

will be transmitted to your PC.

• Even if camera images are not transferred, they can be directly displayed on the 

computer from a camera connected to the computer.

• When you edit an image, transfer the image to your computer.

If the SD Memory Card has a volume label, the volume label name appears instead of 
[Removable Disk]. A new unformatted SD Memory Card may show the manufacturer 
name or model number.

• If the camera (removable disk) is being used by an application such as ACDSee for 

PENTAX 2.0, the camera cannot be disconnected until the application is closed.

• When you remove a USB cable, the USB mode will be cancelled, switching to Playback 

mode with the lens retracted.

 Select folders

This section describes the procedures for installing ACDSee for PENTAX, which lets you view 
and edit images transferred to your Macintosh. 

1

2

3

4

The PENTAX Software Installer screen appears.
Double-click the [Master Installer] icon to display the PENTAX Software Installer screen.

5

A selection screen to install your desired software appears.

6

The setup screen appears. Follow the on-screen guidance to 
input registration information and install the software.

• If the message [CarbonLib-xxxxx could not be found] appears during installation;

You must add the extension file “CarbonLib” to the Extension folder in the System folder 
in order to install the provided software in Mac OS 9.2.
This message appears when this extension file does not exist or when an older version 
of the file exists.
The latest version of the CarbonLib file is available on the Apple website. Download the 
file and then install it.
Apple website: http://www.apple.com/

∗

Contact Apple for detailed information on how to use the CarbonLib file.

• If you install ACDSee for PENTAX, a photo-stitching software application, ACD 

photostitcher, is installed at the same time.

• When you have completed the installation, folder will be created in ACDSee for 

PENTAX. To run ACD photostitcher, double-click [ACD photostitcher] icon in the [ACD 
photostitcher] folder.

1

2

3

The camera is recognized as [untitled] ([NO_NAME] in Mac OS X) on the 
desktop. The drive name can be changed.

It is convenient to use iPhoto, ImageCapture, or ACDSee Device Detector when you transfer 
an image to your Macintosh. See your Macintosh user’s manual.

1

If the SD Memory Card has a volume label, drag the icon of that name to the trash.

2

• If you connect the camera to a Macintosh with the USB connection mode set to 

[PictBridge], you cannot transfer an image. Remove the camera from the Macintosh and 
then set the USB mode to [PC]. Reconnect the USB cable by referring to “Setting Up 
Your Digital Camera” in this manual.

• We recommend using an AC Adapter D-AC8 (optional) when connecting your camera to 

your computer. Your image data could be corrupted if your batteries run out during image 
transfer.

• If the SD Memory Card has a volume label, the volume label name appears instead of 

[untitled]. A new unformatted SD Memory Card may show the manufacturer name or 
model number.

• While communicating with a Macintosh via a USB cable, the status lamp blinks green.
• If there is no SD Memory Card in the camera, the images stored in the built-in memory 

will be transmitted to your Macintosh.

• Even if camera images are not transferred, they can be directly displayed on the 

Macintosh from a camera connected to the Macintosh.

• To edit images, first transfer them to your Macintosh.

• If the camera (removable disk) is being used by an application such as ACDSee for 

PENTAX, the camera cannot be disconnected until the application is closed.

• When you remove a USB cable, the USB mode will be cancelled, switching to Playback 

mode with the lens retracted.

Please click [Product Registration] on the software selection 
screen in 

. 

A world map for Internet Product Registration is displayed.

If your PC is connected to the Internet, click the displayed 
country or region and then follow the instructions to register 
your product.

Thank you very much for your cooperation.

Only customers in displayed countries and regions can register their products on the 
Internet Product Registration.

Step 3

Windows, Macintosh

Step 4

Windows

Step 5

Macintosh

Step 5

Macintosh

Step 3