VIVOTEK FD6121V 사용자 설명서
- 28 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
F: 886-2-82455532
Build a Security Application
The Administrator can combine options
on the application page to perform many
useful security applications. There are
two trigger sources coming from
attached devices, such as for motion
detection. There are also two kinds of
actions responding to such events,
including uploading snapshots over the
Internet and driving other attached
devices. To upload the snapshots, the
User can choose either email or FTP according to user’s needs. Both e-mail and FTP
use the network settings on the Mail & FTP page. Refer to the definition section for
detail configuration.
1. Click on “Configuration” on the
homepage,
2. Click on “Application” in the left
column,
3. Check the weekdays as you need and
give the period of "Snapshots begin"
time and "Snapshots end" time to
monitor the triggering conditions every
day,
4. Check the “Event operation”. The
triggering condition can be set to
detected motion or status of the attached device,
5. Set the delay before detecting next event to avoid continuous false alarms
following the original event,
on the application page to perform many
useful security applications. There are
two trigger sources coming from
attached devices, such as for motion
detection. There are also two kinds of
actions responding to such events,
including uploading snapshots over the
Internet and driving other attached
devices. To upload the snapshots, the
User can choose either email or FTP according to user’s needs. Both e-mail and FTP
use the network settings on the Mail & FTP page. Refer to the definition section for
detail configuration.
1. Click on “Configuration” on the
homepage,
2. Click on “Application” in the left
column,
3. Check the weekdays as you need and
give the period of "Snapshots begin"
time and "Snapshots end" time to
monitor the triggering conditions every
day,
4. Check the “Event operation”. The
triggering condition can be set to
detected motion or status of the attached device,
5. Set the delay before detecting next event to avoid continuous false alarms
following the original event,