Panasonic DMC-LC40PP 사용자 설명서
89
Card
• When the card is being read, do not
• When the card is being read, do not
remove the card, turn off the power, or
subject it to vibration or impact.
subject it to vibration or impact.
• Do not leave the card in places where
there is high temperature or direct sunlight,
or where electromagnetic waves or static
electricity are easily generated.
or where electromagnetic waves or static
electricity are easily generated.
• Do not bend or drop the card. The card or
the recorded content may be damaged.
• After use, be sure to remove the card from
the digital camera.
• Do not touch the terminals on the back of
the card with your fingers. Do not allow
dirt, dust or water to enter it.
dirt, dust or water to enter it.
ª LCD Monitor/Viewfinder/Lens Ring
LCD monitor
• In a place with drastic temperature
• In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with soft dry cloth.
LCD monitor. Wipe it with soft dry cloth.
• If the digital camera is extremely cold
when you turn the power on, the image on
the LCD monitor is slightly darker than
usual at first. However, as the internal
temperature increases, it goes back to the
normal brightness.
the LCD monitor is slightly darker than
usual at first. However, as the internal
temperature increases, it goes back to the
normal brightness.
Extremely high precision technology is
employed to produce the LCD monitor
screen featuring a total of approximately
110,000 pixels. The result is more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
employed to produce the LCD monitor
screen featuring a total of approximately
110,000 pixels. The result is more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
Viewfinder
• Do not direct the viewfinder or lens to the
• Do not direct the viewfinder or lens to the
sun. Internal components may be seriously
damaged.
damaged.
Lens ring
• Do not attach other conversion lenses on
• Do not attach other conversion lenses on
the lens ring; there is no mount to be used
for the attachment.
for the attachment.
• When you want to attach the tele
conversion lens (DMW-LT52; optional) or
wide conversion lens (DMW-LW52;
optional), first of all, turn the lens ring
counterclockwise. If the MC protector
(DMW-LMC52; optional) is used, the lens
ring can be mounted on the filter.
wide conversion lens (DMW-LW52;
optional), first of all, turn the lens ring
counterclockwise. If the MC protector
(DMW-LMC52; optional) is used, the lens
ring can be mounted on the filter.
• If you push the zoom lever toward W
during recording with the filter or
conversion lens attached to the digital
camera, 4 corners of the image may
become dark (vignetting). For details, refer
to the operating instructions of your
accessories.
conversion lens attached to the digital
camera, 4 corners of the image may
become dark (vignetting). For details, refer
to the operating instructions of your
accessories.
• Be sure to keep the lens ring attached to
the digital camera so as to shut out
unnecessary light.
unnecessary light.
KC3-PP.book 89 ページ ２００２年４月５日 金曜日 午前１１時５５分