Panasonic DMC-LS80 사용자 설명서

다운로드
페이지 113
- 1 -
Advanced-Shooting
The available flash range to take 
pictures in intelligent ISO are as 
follows:
ISO LIMIT 
Available flash range
ISO MAX400 60 cm to 3.7 m (Wide)
40 cm to 2.0 m (Tele)
ISO MAX800 80 cm to 5.3 m (Wide)
60 cm to 2.9 m (Tele)
ISO MAX
1250
1.0 m to 6.6 m (Wide)
80 cm to 3.6 m (Tele)
Shutter speed for each flash mode
Flash mode
Shutter speed (sec.)
r
 : AUTO
1/30 to 1/2000
s
 : AUTO/
Red-eye 
reduction
1/30 to 1/2000
t
 : Forced Flash 
ON
q
 : Forced 
ON/Red-eye 
reduction
1/30 to 1/2000
u
 : Slow sync./
Red-eye 
reduction
1/8 or
1 to 1/2000
Û
1
 
v
  : Forced Flash 
OFF
1/4 or 1 to 1/2000
Û
2
1/8 or 1 to 1/2000
Û
3
Û
1  [NIGHT PORTRAIT] or [CANDLE 
LIGHT] mode
Û
2  When intelligent ISO is set or in 
[SPORTS], [BABY] or [PET] mode
Û
3  When in normal picture mode 
[
], [NIGHT PORTRAIT] or [CANDLE 
LIGHT] mode
The shutter speed reaches the maximum 
of 1 second for Û1, Û2 and Û3 when:
Optical Image Stabilizer is [OFF]
When the Optical Image Stabilizer 
is set to [MODE1] or [MODE2] and 
the camera determines that there is 
minimum possibility of blurring.
The shutter speed will be different from 
that shown in the table in the following 
scene modes.
[NIGHT SCENERY]:  
1/8th of a second or 8 seconds to 

1/2000th of a second
[STARRY SKY]:  
15 seconds, 30 seconds, 60 seconds
[FIREWORKS]:  
1/4th of a second, 2 seconds
Other scene modes: 
1/8th of a second to 1/2000th of a second
Do not look directly at the flash at 
close range when it is activated.
Do not bring the flash too close to 
objects or close the flash while it 
is activated. The objects may be 
discolored by its heat or lighting.
While the flash is charged, the LCD 
monitor turns off and you cannot take 
pictures. The status indicator lights up.  
If the remaining battery power is low, 
the screen may be turned off for a 
longer period of time.
When you take a picture beyond the 
available flash range, the exposure may 
not be adjusted properly and the picture 
may become bright or dark.
When the flash icon blinks, the flash is 
being charged and you cannot take a 
picture even when you press the shutter 
button fully.
The white balance may not be properly 
adjusted if the photo flash is insufficient.
When the shutter speed is fast, the flash 
effect may not be sufficient.
When you repeat taking a picture, 
recording may be disabled even if the 
flash is activated. Take a picture after the 
access indication disappears.
The red-eye reduction effect differs 
between people. Also, if the subject was 
far away from the camera or was not 
looking at the first flash, the effect may 
not be evident.
In burst mode or auto bracket mode, you 
cannot use the flash.