Panasonic DMC-LS80 사용자 설명서

다운로드
페이지 113
-  -
Advanced-Shooting
When the aspect ratio setting is 
[
j]
Item
Picture size
fps
30fps16:9
848 × 480 pixels 30 fps
10fps16:9
848 × 480 pixels 10 fps
fps (frame per second); This refers to the 
number of frames used in 1 second.
You can record smoother motion pictures 
with 30 fps.
You can record longer motion pictures 
with 10 fps although the picture quality 
is lower.
[10fpsQVGA]: 
The file size is smaller, so the files are 
suitable to be attached to e-mails.
Û
  Set [ASPECT RATIO] to [
h] and the 
[PICTURE MODE] to [30fpsQVGA] or 
[10fpsQVGA] (320 × 240 pixels) when 
you record motion pictures to the built-in 
memory.
Press [MENU/SET] to close the 
menu.
You can also press the shutter 
button halfway to close the menu.
When you use the optical image stabilizer 
function, only [MODE1] is available in 
motion picture mode.
Refer to
available recording time.
The remaining recordable time shown on 
the LCD may not reduce regularly.
This camera cannot take motion pictures 
if you are using a MultiMediaCard.
When [PICTURE MODE] is set 
to [30fpsVGA] or [30fps16:9], we 
recommend that you use cards offering 
“10 MB/s” or higher speeds (printed on 
their packages and elsewhere) for best 
results.
Depending on the type of SD Memory 
Card or SDHC Memory Card, recording 
may stop in the middle.
6�
We recommend using Panasonic’s SD 
Memory Card/SDHC Memory Card.
Depending on the type of card you are 
using, the card access indication may 
appear for a while after shooting motion 
pictures. This is normal.
Motion pictures can be recorded 
continuously for up to 2 GB. The 
maximum available recording time for up 
to 2 GB only is displayed on the screen.
(DMC-LS80GC/DMC-LS80PL)
Motion pictures can be recorded 
continuously for up to 15 minutes. The 
maximum continuous recording time (up 
to 15 minutes) is displayed on the screen.
(DMC-LS80EG/DMC-LS80E)
When motion pictures recorded with 
this camera are played back on other 
equipment, the quality of pictures may 
be deteriorated or it may not be possible 
to play them back. Also the recording 
information may not be displayed 
correctly.
When the brightness of the subject is 
changed, the lens operation noise may 
be recorded.
In motion picture mode [
i
] the following 
functions cannot be used.
Direction detection function
[MODE2] on the optical image stabilizer 
function
To hear audio recorded with movie, 
recording must be played back on a 
computer. This camera is not equipped 
with a speaker.