Panasonic DMC-LX2 작동 가이드

Connecting to other equipment

VQT0Y44

 

By connecting the camera directly to a printer 
supporting PictBridge via the USB connection 
cable (supplied), you can select the pictures to 
be printed or start printing on the LCD monitor.
Make the necessary settings on your printer 
beforehand. (Read your printer’s operating 
instructions.)

1

2

• [PLEASE CONNECT TO THE PRINTER] 

appears.

3

Connect the camera to a printer 
via the USB connection cable A  
(supplied).

• Connect the USB connection cable with 

the [f] mark facing the [w] mark on 

the [DIGITAL] socket.

• Hold 

C

 and then insert or pull the USB 

connection cable straight.

• Do not use any other USB connection 

cables except the supplied one.

• When you connect the camera to a printer without 

setting the mode dial to [

], remove the cable, 

set the mode dial to [

], turn the camera and 

the printer off and on, and connect again.

• If a card is not inserted when the camera is 

connected to the printer, you can print the 
picture data on the built-in memory. If a card is 
inserted, you can print the picture data on it.

• You cannot switch between the built-in memory 

and the card while the camera is connected to 
the printer. When you want to switch between 
the built-in memory and the card, disconnect 
the USB connection cable, insert (or remove) 
the card and then connect the USB connection 
cable to the printer again.

• To print the age in [BABY1]/[BABY2] (P69) in 

scene mode or the departure date for [TRAVEL 
DATE] (P70), use the software [LUMIX Simple 
Viewer] or [PHOTOfunSTUDIO-viewer-] in the 
CD-ROM (supplied) and print from the PC. For 
information about this, refer to the separate 
operating instructions for PC connection.

• To find out more about PictBridge compliant 

printers, contact your local dealer.

n

A

 : USB connection cable (supplied)

B

 : AC adaptor (DMW-AC5; optional)

• It may take time to print some pictures. 

Therefore, we recommend using a battery with 
sufficient power (P14) or the AC adaptor (DMW-
AC5; optional) when you connect to a printer.

• Make sure this unit is off before 

connecting or disconnecting the AC 
adaptor (DMW-AC5; optional).