Panasonic DMC-LX2 작동 가이드

Advanced

VQT0Y44

• When the burst mode setting is set to 

Unlimited:
– You can take pictures until the capacity 

of the built-in memory or the card is full.

– The burst speed will become slower 

halfway. When the built-in memory is 
used, the burst speed becomes a 
maximum of 1 picture approximately 
every 6 seconds. However, the exact 
timing of this depends on the number of 
recordable pictures and the card.

• The focus is fixed in the first picture.
• The ways to control the exposure and the 

white balance vary depending on the 
burst mode setting. When the burst mode 
is set to [D], they are fixed to the 
values set for the first picture. When the 
burst speed is set to [E] or [F], 
they are adjusted each time you take a 
picture.

• When the self-timer is used, the number 

of recordable pictures in burst mode is 
fixed to 3.

• Burst mode is not canceled when the 

camera is switched off.

• When the burst mode is activated, the 

audio recording function cannot be used.

• When setting auto bracket and the burst 

mode simultaneously, auto bracket will be 
performed.

• In Burst mode, auto review is activated 

even the setting is off. (The picture is not 
enlarged.) You cannot change the auto 
review setting in the setup menu.

• You cannot use burst mode if you have set 

quality to [RAW].