Panasonic HDC-SD5PP 사용자 설명서

VQT1H62

≥ Check that the status indicator has gone off.

While sliding the SD CARD/
BATTERY OPEN lever A, move 
the SD card/battery cover and 
open it.

≥ When inserting an SD card, face the label side 

B in the direction shown in the illustration and 
press it straight in as far as it will go.

≥ When removing the SD card, press the center 

of the SD card and then pull it straight out.

≥ Securely close it until it clicks.

ª About the SD card

≥ Do not touch the terminals on the back of the 

SD card.

≥ Electrical noise, static electricity or the failure 

of this unit or the SD card may damage or 
erase the data stored on the SD card. We 
recommend saving the important data 
recorded on this unit to a PC using the USB 
cable (supplied), HD Writer 2.0E for SX/SD 
etc. (l 102) (We recommend using HD Writer 

2.0E for SX/SD to acquire data recorded on 
this unit.)

≥ When using an SD card on which data has 

been written many times, the remaining time 
left for recording may be reduced. (l 44)

ª Card access lamp [ACCESS]

≥ When this unit accesses the SD card (reading, 

recording, playback, erasing etc.), the access 
lamp A lights up.

≥ When the lamp is lit do not

jOpen the SD card/battery cover and remove 

the SD card or the battery or disconnect the 
AC adaptor.

jOperate the mode dial
Performing the above while the lamp is on may 
result in damage to data/SD card or this unit.

A

1

2

B

A

VQT1H62_ENG_PP.book  33 ページ  ２００７年７月１７日　火曜日　午後５時４４分