Panasonic BL-C20A 사용자 설명서
Operating Instructions
88
How to
authenticate
authenticate
You can select the authentication method: [No authentication],
[POP before SMTP authentication] and [SMTP authentication].
[POP before SMTP authentication] and [SMTP authentication].
POP server authentication may be required by your ISP. In
that case, set POP before SMTP authentication.
that case, set POP before SMTP authentication.
•
No authentication: No authentication when sending an e-
mail.
mail.
•
POP before SMTP authentication: Some SMTP servers
that send e-mails do not have an authentication feature.
Therefore, the camera uses the authentication of a POP
server that receives e-mails, before sending e-mails.
that send e-mails do not have an authentication feature.
Therefore, the camera uses the authentication of a POP
server that receives e-mails, before sending e-mails.
–
POP3 Server
IP Address or
Host Name
IP Address or
Host Name
*1
:
If you set a server IP address, set 4
numbers (0—255) and 3 periods, such as
"192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available. Or
set a host name (0—255 characters).
numbers (0—255) and 3 periods, such as
"192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available. Or
set a host name (0—255 characters).
–
Port No.:
Enter a number (1—65535). Usually set
to 110.
to 110.
–
Login ID
*2
:
If your ISP requires a login ID to log in to
a POP3 server, set it (1—63 characters).
a POP3 server, set it (1—63 characters).
–
Password
*2
:
If your ISP requires a password to log in
to a POP3 server, set it (0—63
characters).
to a POP3 server, set it (0—63
characters).
•
SMTP authentication: Users are authenticated by user
name and password on the SMTP server. Your ISP must
support the SMTP authentication. Only the LOGIN and
PLAIN authentication mechanisms are supported.
name and password on the SMTP server. Your ISP must
support the SMTP authentication. Only the LOGIN and
PLAIN authentication mechanisms are supported.
–
Login ID
*2
:
If your ISP requires a login ID to log in to
an SMTP server, set it (1—63
characters).
an SMTP server, set it (1—63
characters).
–
Password
*2
:
If your ISP requires a password to log in
to an SMTP server, set it (0—63
characters).
to an SMTP server, set it (0—63
characters).
*1
Note that [Space], ["], ['], [&], [<] and [>] are not available.
*2
Note that ["] is not available.
Setting
Description