Panasonic DMC LX 3 사용자 가이드

VQT1T27

A 

Do not use any other USB connection cables except the supplied one. Use of cables other than 
the supplied USB connection cable may cause malfunction.

Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; 
optional).

Before inserting or removing a card, turn the camera off, and disconnect the USB connection 
cable.

You cannot switch between the built-in memory and the card while the camera is connected to 
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect 
the USB connection cable to the printer again.

When the pictures in RAW files are to be printed, the JPEG pictures recorded simultaneously 
by the camera will be printed. If JPEG pictures do not exit, RAW file pictures cannot be printed.

A USB connection cable (supplied)

Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)

B Align the marks, and insert.
C AC adaptor (DMW-AC5PP; optional)

Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5PP; optional). If the 
remaining battery power becomes low while the camera and the printer are connected, the 
status indicator blinks and the alarm beeps. If this happens during printing, stop printing at 
once. If not printing, disconnect the USB connection cable.

When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears. 
Do not disconnect the USB cable while [å] is displayed.

3/4 to select [PictBridge(PTP)], and then 

DC IN

AV OUT/ DIGIT

AL

COMPONENT

OUT

U

S

B MODE

S

ELECT

S

ET

PLEA

S

E 

S

ELECT 

THE U

S

B MODE

PictBridge(PTP)

PC

P.PC_DMC-LX3_eng.book  113 ページ  ２００８年７月８日　火曜日　午後１０時１３分