Optimus S1000PJ 사용자 설명서

Basic Camera Setup: The Setup Menu

S

h

oot

in

g, P

laybac

k

 an
d Se

tu

p Me

nus

i

Adjust the following sound settings.

k

When the camera is on and a specified period of time passes with no operations 
performed, the monitor turns off and the camera will enter standby mode (

A 17) 

to save power. Once the camera has entered standby mode, the power-on lamp 
will blink, and if no operations are performed for another three minutes, the 
camera will turn off. 

Choose the time allowed to elapse before the camera enters standby mode if no 
operations are performed from 30

 s, 1 min (default setting), 5 min, and 30 min.

C

Cancel standby mode and reactivate the monitor by pressing any of the following buttons.

C

Regardless of the option selected, the monitor will remain on for three minutes when menus are 
displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC 
adapter is connected.

C

Use the 

Auto off (A 145) option in the projector settings menu to specify the auto off setting for 

projector mode.

d button M z (Setup menu) (A 118) M i Sound settings

Button sound

Turn button sound 

On or Off.

When 

On (default setting) is selected, a beep will sound once when operations are 

completed successfully, twice when focus has been locked, and three times when 
an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Turn shutter sound 

On (default setting) or Off.

d button M z (Setup menu) (A 118) M k Auto off

• the power switch

• the shutter-release button

•  the A button

• the 

c button