Optimus S1000PJ 사용자 설명서

U

sin

g th

e proje

ct

o

r

The COOLPIX S1000pj is equipped with a built-
in projector. The ability to project pictures and 
movies with simple operation makes for a 
convenient way of enjoying photos at 
gatherings of family and friends.

Place the camera.

Place the projector stand (supplied) on a stable 
and level surface such as a table.

Place the camera on the projector stand so that 
the projection on the stand fits into the 
camera’s tripod socket.

Position the camera so that the projector 
window is pointed at a flat white surface or 
movie or projector screen.

The projection distance between the camera 
and screen should be approximately 26 cm  to  2 m  (10 in.  to  6 ft.  6 in.)  (

Turn on the camera and press the 

P 

button.

The camera enters projector mode and a picture 
stored in the internal memory or on a memory 
card inserted into the camera is projected in full-
frame playback mode onto the screen.

The camera’s monitor turns off while projecting.

Adjust the camera position.

To change the projected picture size, adjust the distance between the camera and 
screen.

Adjust the projection angle to reduce picture distortion.

B

When the supplied projector stand is used, pictures are projected at a slightly upward angle to 
prevent the surface on which the stand and camera are placed from obstructing picture projection. 
The slightly upward angle of projection causes a type of distortion known as a keystone effect, 
skewing picture dimensions. Using a tripod rather than the supplied projector stand to stabilize the 
camera simplifies camera positioning and may also reduce the keystone effect.

Tripod socket

Projector 
stand