Optimus S1000PJ 사용자 설명서

The Projector Settings Menu

U

sin

g th

e proje

ct

o

r

This option offers automatic adjustment of projection brightness to save power.

When the specified period of time passes with no operations performed in 
projector mode, the camera ends projection and enters standby mode (

save power. Once the camera has entered standby mode, the power-on lamp will 
blink, and if no operations are performed for another three minutes, the camera 
will turn off. Choose the time allowed to elapse before standby mode is initiated 
when no operations are performed in projector mode from 30

 s, 1 min, 5 min 

(default setting), and 30

 min.

C

• When the camera enters standby mode from projector mode, press the power switch, shutter-

release button or 

c button to activate playback mode.

• Press the A button to activate shooting mode.

• To resume projection, press the 

P button again in playback mode or shooting mode.

C

The time allowed to pass before the camera enters standby mode is fixed as follows:

• During slide show playback with the loop option enabled: 30 minutes

• When the projector menu or projector settings menu is displayed: three minutes

P button (projector mode) M d (Projector menu) M z (Projector settings menu) M 
Power saving

On

Enable power saving mode. Projection may appear slightly darker than when 

Off is 

selected.

Off (default setting)

Power saving mode is disabled. When the battery is low, the camera automatically 
adjusts projection brightness to save power even when 

Off is selected.

P button (projector mode) M d (Projector menu) M z (Projector settings menu) M 
Auto off