Optimus S1000PJ 사용자 설명서

156

chni

cal N

Troubleshooting

If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.

Display, Settings and Power Supply

Problem

Cause/Solution

Monitor is blank.

• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: press the power

switch, the shutter-release button, the A button, or
the

c button.

• When flash lamp blinks red, wait until flash has charged.
• Camera and computer are connected via USB cable.
• Camera and TV are connected via A/V cable.
• Monitor turns off during projecting.

17
16
129

31
85
84
137

Monitor is hard to read.

• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.

124
151

Camera turns off without
warning.

• Battery is exhausted.
• Camera has turned off automatically to save power.

• The camera has become hot due to the heat of the

projector. Leave the camera off until it has cooled
and then turn it on again.

• Battery is cold.

22
129,
145
138,
154

150

Date and time of
recording are not correct.

• Pictures and movies recorded before the clock has

been set will have a time stamp of “00/00/0000
00:00” for pictures and “01/01/2009 00:00” for
movies. The “Date not set” indicator blinks during
shooting. Set the correct time and date from the

Date option in the setup menu.

• Check camera clock regularly against more accurate

timepieces and reset as required.

18,
121

121

No indicators displayed
in monitor.

Hide info is selected for Photo info.
Select

Show info.

124

Date imprint not
available.

Camera clock has not been set.

18,
121