Nikon D7100KIT 사용자 설명서
317
n
A
Use a Reliable Power Source
The shutter curtain is delicate and easily damaged. If the camera powers off while the mirror
is raised, the curtain will close automatically. To prevent damage to the curtain, observe the
following precautions:
• Do not turn the camera off or remove or disconnect the power source while the mirror is
is raised, the curtain will close automatically. To prevent damage to the curtain, observe the
following precautions:
• Do not turn the camera off or remove or disconnect the power source while the mirror is
raised.
• If the battery runs low while the mirror is raised, a beep will sound and the self-timer lamp
will flash to warn that the shutter curtain will close and the mirror will be lowered after
about two minutes. End cleaning or inspection immediately.
about two minutes. End cleaning or inspection immediately.
D
Foreign Matter on the Image Sensor
Nikon takes every possible precaution to prevent foreign matter from coming into contact
with the image sensor during production and shipping. The D7100, however, is designed to
be used with interchangeable lenses, and foreign matter may enter the camera when lenses
are removed or exchanged. Once inside the camera, this foreign matter may adhere to the
image sensor, where it may appear in photographs taken under certain conditions. To
protect the camera when no lens is in place, be sure to replace the body cap provided with
the camera, being careful to first remove all dust and other foreign matter that may be
adhering to the body cap. Avoid exchanging lenses in dusty environments.
with the image sensor during production and shipping. The D7100, however, is designed to
be used with interchangeable lenses, and foreign matter may enter the camera when lenses
are removed or exchanged. Once inside the camera, this foreign matter may adhere to the
image sensor, where it may appear in photographs taken under certain conditions. To
protect the camera when no lens is in place, be sure to replace the body cap provided with
the camera, being careful to first remove all dust and other foreign matter that may be
adhering to the body cap. Avoid exchanging lenses in dusty environments.
Should foreign matter find its way onto the image sensor, clean the sensor as described
above, or have the sensor cleaned by authorized Nikon service personnel. Photographs
affected by the presence of foreign matter on the sensor can be retouched using
Capture NX 2 (available separately; 0 309) or the clean image options available in some
third-party imaging applications.
above, or have the sensor cleaned by authorized Nikon service personnel. Photographs
affected by the presence of foreign matter on the sensor can be retouched using
Capture NX 2 (available separately; 0 309) or the clean image options available in some
third-party imaging applications.