Nikon D7100 Body 사용자 설명서

51

#

In manual mode, you control both shutter speed and aperture. While 
the exposure meters are on, rotate the main command dial to choose 
a shutter speed, and the sub-command dial to set aperture. Shutter 
speed can be set to “v” or to values between 30 s and 

1

/

8000

s, or 

the shutter can be held open indefinitely for a long time-exposure 
(Bulb/A or Time/%, 0 52). Aperture can be set to values 
between the minimum and maximum values for the lens. Use the exposure 
indicators to check exposure.

A

Provided that an external exposure meter is used, the exposure ratio need only be taken into 
account when the lens aperture ring is used to set aperture.

A

If a shutter speed other than Bulb (A) or Time (%) is selected, the exposure indicator in 
the viewfinder shows whether the photograph would be under- or over-exposed at current 
settings. Depending on the option chosen for Custom Setting b2 (EV steps for exposure 

cntrl, 0 234), the amount of under- or over-exposure is shown in increments of 

1

/

3

EV or 

1

/

2

EV (the illustrations below show the display in the viewfinder when 1/3 step is selected 

for Custom Setting b2). If the limits of the exposure metering or live view exposure control 
system are exceeded, the indicator will flash.

A

For information reversing the exposure indicators so that negative values are displayed on 
the right and positive values on the left, see Custom Setting f8 (Reverse indicators, 0 258).