Nikon COOLPIXS100RED 사용자 설명서

다운로드
페이지 236
16
B
asi
c S
tep
s for S
h
oot
in
g
 and Play
ba
ck
Preparation 2 Charge the Battery
1
Prepare the included Charging AC Adapter EH-69P.
If a plug adapter* is included, attach the plug adapter to the plug on 
the Charging AC Adapter. Push the plug adapter firmly until it is 
securely held in place. Once the two are connected, attempting to 
forcibly remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or 
region in which the camera was purchased. 
The Charging AC Adapter comes with the plug adapter attached 
in Argentina, Brazil, and Korea.
2
Make sure the battery is installed in the camera, and then connect the 
camera to the Charging AC Adapter in the order indicated by the 
numbers in the illustration below.
• Keep the camera turned off.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, 
and do not use force when connecting or disconnecting the plugs.
• The power-on lamp slowly blinks orange to indicate that the battery is charging.
• About 3 hours and 15 minutes are required to charge a fully exhausted battery.
• When the battery has been completely charged, the power-on lamp turns off.
• See “Understanding the Power-on Lamp” (A 17) for more information.
3
Disconnect the Charging AC Adapter from the electrical outlet and 
then disconnect the USB cable.
• When the camera is connected to an electrical outlet with the Charging AC Adapter, 
the camera cannot be turned on.
USB Cable UC-E6 (included)
Electrical outlet
Power-on lamp