Nikon 26442 사용자 설명서
x
In
• Do not damage, modify, forcibly tug or
bend the USB cable, place it under heavy
objects, or expose it to heat or flames.
Should the insulation be damaged and
the wires become exposed, take it to a
Nikon-authorized service representative
for inspection. Failure to observe these
precautions could result in fire or electric
shock.
objects, or expose it to heat or flames.
Should the insulation be damaged and
the wires become exposed, take it to a
Nikon-authorized service representative
for inspection. Failure to observe these
precautions could result in fire or electric
shock.
• Do not handle the plug or Charging AC
Adapter with wet hands. Failure to
observe this precaution could result in
electric shock.
observe this precaution could result in
electric shock.
• Do not use with travel converters or
adapters designed to convert from one
voltage to another or with DC-to-AC
inverters. Failure to observe this
precaution could damage the product or
cause overheating or fire.
voltage to another or with DC-to-AC
inverters. Failure to observe this
precaution could damage the product or
cause overheating or fire.
Use the appropriate power supply
(battery, Charging AC adapter, AC
adapter, USB cable)
(battery, Charging AC adapter, AC
adapter, USB cable)
Using a power supply other than those
provided or sold by Nikon could result in
damage or malfunction.
provided or sold by Nikon could result in
damage or malfunction.
Use appropriate cables
When connecting cables to the input and
output jacks, use only the cables provided
or sold by Nikon for the purpose, to
maintain compliance with product
regulations.
output jacks, use only the cables provided
or sold by Nikon for the purpose, to
maintain compliance with product
regulations.
Handle moving parts with care
Be careful that your fingers or other objects
are not pinched by the lens cover or other
moving parts.
are not pinched by the lens cover or other
moving parts.
Using the flash close to your
subject’s eyes could cause
temporary visual impairment
subject’s eyes could cause
temporary visual impairment
The flash should be no less than 1 meter
(3 ft 4 in.) from the subject.
Particular care should be observed when
photographing infants.
(3 ft 4 in.) from the subject.
Particular care should be observed when
photographing infants.
Do not operate the flash with the
flash window touching a person or
object
flash window touching a person or
object
Failure to observe this precaution could
result in burns or fire.
result in burns or fire.
Avoid contact with liquid crystal
Should the monitor break, care should be
taken to avoid injury caused by broken glass
and to prevent liquid crystal from the
monitor touching the skin or entering the
eyes or mouth.
taken to avoid injury caused by broken glass
and to prevent liquid crystal from the
monitor touching the skin or entering the
eyes or mouth.
Turn the power off when using
inside an airplane or the hospital
inside an airplane or the hospital
Turn the power off while inside the airplane
during take off or landing. Do not use
wireless network functions while in the air.
Follow the instructions of the hospital when
using while in a hospital. The
electromagnetic waves emitted by this
camera may disrupt the electronic systems
of the airplane or the instruments of the
hospital. If you are using an Eye-Fi card,
remove it from the camera before boarding
an aircraft or entering a hospital.
during take off or landing. Do not use
wireless network functions while in the air.
Follow the instructions of the hospital when
using while in a hospital. The
electromagnetic waves emitted by this
camera may disrupt the electronic systems
of the airplane or the instruments of the
hospital. If you are using an Eye-Fi card,
remove it from the camera before boarding
an aircraft or entering a hospital.