Nikon 25468 사용자 설명서
104
S
Press
J to exit when settings are complete.
When On is selected, the display at right appears
in the viewfinder and control panel. When
sensitivity is altered from the value selected by the
user, these indicators blink and the altered value is
shown in the information display.
in the viewfinder and control panel. When
sensitivity is altered from the value selected by the
user, these indicators blink and the altered value is
shown in the information display.
A
Auto ISO Sensitivity Control
Noise is more likely at higher sensitivities. Use the High ISO NR option in the shooting menu
to reduce noise (see page 205). When a flash is used, the value selected for Minimum
shutter speed is ignored in favor of the option selected for Custom Setting e1 (Flash sync
speed,
to reduce noise (see page 205). When a flash is used, the value selected for Minimum
shutter speed is ignored in favor of the option selected for Custom Setting e1 (Flash sync
speed,
0 222). Note that ISO sensitivity may be raised automatically when auto ISO
sensitivity control is used in combination with slow sync flash modes (available with the
built-in flash and SB-900, SB-800, SB-700, SB-600, and SB-400 flash units), possibly
preventing the camera from selecting slow shutter speeds.
built-in flash and SB-900, SB-800, SB-700, SB-600, and SB-400 flash units), possibly
preventing the camera from selecting slow shutter speeds.