Nikon 25420 사용자 설명서
34
Reference: More on Photography (All Modes)/Using the Built-in Flash
Using the Built-in Flash
The camera supports a variety of flash modes for photographing poorly lit or backlit sub-
jects. The flash modes available depend on the mode selected with the mode dial; note
that the flash can not be used in , , or mode. The default flash setting for Digital Vari-
Program modes is automatically restored when the mode dial is rotated to a new setting or
the camera is turned off.
jects. The flash modes available depend on the mode selected with the mode dial; note
that the flash can not be used in , , or mode. The default flash setting for Digital Vari-
Program modes is automatically restored when the mode dial is rotated to a new setting or
the camera is turned off.
Using the Built-in Flash:
, , , , and Modes
Using the Built-in Flash: P, S, A, and M Modes
Lowering the Built-in Flash
To save power when the flash is not in use, press it gently downward until the latch clicks
into place.
To save power when the flash is not in use, press it gently downward until the latch clicks
into place.
Controls used
1
Rotate the mode dial to
, , , , or .
2
Choose a flash mode.
3
Take pictures. Unless (off ) is selected, the flash will pop up
as required when the shutter-release button is pressed halfway
and fire when a photograph is taken.
as required when the shutter-release button is pressed halfway
and fire when a photograph is taken.
1
Rotate the mode dial to P, S, A, or M.
2
Press the
button to raise the flash.
3
Choose a flash mode.
4
Choose a metering method and adjust exposure.
5
Take pictures. The flash will fire whenever a picture is taken. To prevent the flash from
firing, lower the flash.
firing, lower the flash.