Canon EOS1DBODY 사용자 설명서
179
Bulb Exposures
If you use the self-timer or bulb and take
a picture without looking through the
viewfinder, stray light entering the
eyepiece can throw off the exposure and
result in a dark picture. To prevent this,
slide the eyepiece shutter lever as
shown by the arrow to shutter the
eyepiece.
You need not shutter the eyepiece during
Live View shooting or movie shooting.
a picture without looking through the
viewfinder, stray light entering the
eyepiece can throw off the exposure and
result in a dark picture. To prevent this,
slide the eyepiece shutter lever as
shown by the arrow to shutter the
eyepiece.
You need not shutter the eyepiece during
Live View shooting or movie shooting.
You can connect the Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) or any EOS accessory
equipped with an N3-type terminal to the camera for shooting (p.357).
To operate the accessory, refer to its instruction manual.
Controller TC-80N3 (both sold separately) or any EOS accessory
equipped with an N3-type terminal to the camera for shooting (p.357).
To operate the accessory, refer to its instruction manual.
1
Open the terminal cover.
2
Connect the plug to the remote
control terminal.
control terminal.
Connect the plug as shown in the
illustration.
illustration.
To disconnect the plug, grasp the
silver part and pull.
silver part and pull.
Using the Eyepiece Shutter
F
Using a Remote Switch
COP
Y