Canon EOS1DBODY 사용자 설명서

192

D

 Flash Photography

 

If the camera is used with a flash unit or flash accessory dedicated to 
another camera brand, the camera may not operate properly and 
malfunction may result.

 

Do not connect to the camera’s PC terminal any flash unit requiring 250 
V or more.

 

Do not attach a high-voltage flash unit on the camera’s hot shoe. It may 
not fire.

A flash unit attached to the camera’s hot shoe and a flash unit connected to 
the PC terminal can both be used at the same time.

This function is for close-up flash photography when you want to set the 
flash level manually. Use an 18% gray card and an EX-series Speedlite with 
manual flash mode. Follow the instructions below:
1. Set the camera and Speedlite settings.

• Set the camera’s shooting mode to <a> or <f>.
• Set the Speedlite to manual flash mode.

2. Focus the subject.

• Focus manually.

3. Set up the 18% gray card.

• Place the gray card at the subject’s position.
• In the viewfinder, the entire spot metering circle should cover the gray 

card.

4. Press the <B> button. (8)
5. Set the flash exposure level.

• Adjust the Speedlite’s manual flash level and the camera 

aperture so that the flash exposure level aligns with the 
standard exposure index.

6. Take the picture.

• Remove the gray card and take the picture.

COP

Y