Canon DIM-462 지침 매뉴얼

You can record still images like photographs. The camcorder records the picture and sound to tape
for several seconds. The exposure is automatically adjusted.
Starting your shooting with a still image makes it easy to find the beginning again later with the
Photo Search function (

93).

You can take a still image at any time during regular video recording, or you can put the camcorder
into record pause mode first, then take a still image.

• The camcorder takes the image immediately, and then records the “photo” to the tape for

approximately 6 seconds. During this time the camcorder also records the sound, and the display
shows the still image.

• A counter display appears, and counts up as the camcorder records the image.
• The camcorder returns to record pause mode.

• “PHOTO” flashes at the bottom right of display.
• Exposure is locked.
• During autofocus 

F flashes white in the display as the camcorder adjusts the focus and it is

displayed continuously as a green mark when the camcorder is ready to take the still image.

• If the subject is unsuitable for autofocus (

144), the camcorder may not be able to focus,

and

F may continue to flash white in the display. Continue to hold the PHOTO button halfway

down, then adjust the focus manually with the focus ring.

• If you are using manual focus (

79), the 

F mark starts as a continuous green mark. Focus

with the focus ring.

PHOTO

For recording still images on a memory card, see p. 118.

During recording

During record pause mode

+