Canon G1X Mark II 사용자 설명서

149

When connecting wirelessly to any device other than a computer, a memory 
card must be inserted in the camera. Additionally, the memory card must 
contain images before you can access Web services or connect to a printer 
wirelessly.

To change the camera’s nickname, choose MENU (

3] tab > [Wi-Fi 

Settings] > [Change Device Nickname].

A message will be displayed if the nickname you attempt to enter in step 2 
begins with a symbol or space. Press the <

m> button and enter a different 

nickname.

Once you have connected to devices via Wi-Fi, recent destinations will 
be listed first when you access the Wi-Fi menu by pressing the <

o> 

button. You can easily connect again by pressing the <

o><p> buttons 

to choose the device name and then pressing the <

m> button.

To add a new device, display the device selection screen by pressing the 
<

q><r> buttons, and then configure the setting.

[

3] tab > [Wi-Fi Settings] > [Target History] > [Off].

Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.

Confirm that the Wi-Fi router or base station conforms to the Wi-Fi 
standards in “Wi-Fi” (

If you are already using Wi-Fi, confirm the following items. For instructions 
on checking network settings, refer to the access point user manual.

If system administrator status is needed to adjust network settings, 
contact the system administrator for details.

These settings are very important for network security. Exercise 
adequate caution when changing these settings.