Canon G1X Mark II 사용자 설명서

157

To add multiple devices, repeat this procedure from the first step.

For better security, you can require password input on the screen in step 3 
by accessing MENU (

) and choosing [

3] tab > [Wi-Fi Settings] > 

[Password] > [On]. In this case, in the password field on the device in step 4, 
enter the password displayed on the camera.

Once you have assigned a connection destination to Touch Actions (

you can prepare the camera to reconnect to the destination simply by dragging 
across the screen with the assigned gesture.

You can reconnect to any previous access points automatically by following 
step 3 in “Connecting without an Access Point” (

).

To use the camera as an access point, choose [Switch Network] on the 
screen displayed when you establish a connection, and then choose 
[Camera Access Point Mode].

When reconnecting via a previous access point, connect the target 
device to the access point in step 4.

To switch access points, choose [Switch Network] on the screen 
displayed when you establish a connection, and then follow the 
procedure in “Connecting to WPS-Compatible Access Points” from step 5 
(

).

Connect two cameras via Wi-Fi and send images between them as follows.

Only Canon-brand cameras equipped with a Wi-Fi function can be connected 
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot 
be connected to if they do not have a Wi-Fi function. You cannot connect to 
DIGITAL IXUS WIRELESS cameras with this camera.

 

z

Press the <

o><p><q><r> buttons or 

turn the <

7> dial to choose [4], and 

then press the <

m> button.

 

z

Press the <

o><p> buttons or turn the 

<

7> dial to choose [Add a Device], and 

then press the <

m> button.

 

z

Follow steps 1 – 3 on the target camera 
too.

 

z

Camera connection information will be 
added when [Start connection on target 
camera] is displayed on both camera 
screens.