Canon DC50 지침 매뉴얼
Getting Started
30
Adjusting the LCD Screen
Rotating the LCD Panel
Open the LCD panel 90 degrees.
• You can rotate the panel 90 degrees
downward.
• You can rotate the panel 180 degrees toward
the lens (allowing the subject to monitor the
LCD screen while you use the viewfinder).
Rotating the panel 180 degrees is also useful
if you wish to include yourself when recording
with the self timer. This is the only case where
you can use the viewfinder and the LCD
screen simultaneously.
Open the LCD panel 90 degrees.
• You can rotate the panel 90 degrees
downward.
• You can rotate the panel 180 degrees toward
the lens (allowing the subject to monitor the
LCD screen while you use the viewfinder).
Rotating the panel 180 degrees is also useful
if you wish to include yourself when recording
with the self timer. This is the only case where
you can use the viewfinder and the LCD
screen simultaneously.
LCD Backlight
You can adjust the brightness of the LCD
screen to one of two levels.
You can adjust the brightness of the LCD
screen to one of two levels.
Keep
pressed down for more
than 2 seconds.
Repeat this action to toggle between the
normal and bright settings.
Repeat this action to toggle between the
normal and bright settings.
NOTES
This setting does not affect the brightness of
the recording or the viewfinder screen.
Using the bright setting will shorten the
effective usage time of the battery.
180°
90°
180°
Subject can monitor the LCD screen
180°
90°
Subject can monitor the LCD screen
180°
DISP.
D119_NTSC-E.book Page 30 Monday, December 18, 2006 10:14 AM