Canon DC50 지침 매뉴얼
Connecting to a TV or VCR
82
Video Input Recording
You can input video from an analog video
source (VCR, TV, etc.) and record it on
the disc in the camcorder.
source (VCR, TV, etc.) and record it on
the disc in the camcorder.
Connecting
Connect the camcorder to the analog
input source following the connection
diagram shown in the previous section
Connection Diagrams (
Connect the camcorder to the analog
input source following the connection
diagram shown in the previous section
Connection Diagrams (
80).
Recording
* Only when using a DVD-RW recorded in VR
mode. With discs recorded in VIDEO mode,
pressing
pressing
will open the menu directly
on the setup menus screen.
F
ROM
THE
VIDEO
INPUT
SCREEN
The following icons are displayed at the
bottom of the video input screen:
bottom of the video input screen:
: Adjust the speaker volume (will not
affect the recording).
/
/
: Select the recording mode.
/
: Start recording/pause the
recording.
: Terminate the video input and return
to
mode.
1
This camcorder: Change the
recording settings as necessary.
recording settings as necessary.
2
Connected device: Load the
recorded cassette or disc and start
playback.
recorded cassette or disc and start
playback.
3
This camcorder: Select (
) the
icon. When the scene you wish to
record appears, press (
record appears, press (
).
Recording starts.
4
This camcorder: To pause the
recording, select (
recording, select (
)
and
press (
).
In record pause mode, select (
)
and press (
) to resume
recording.
T
O
STOP
RECORDING
5
This camcorder: In record pause
mode, select (
mode, select (
)
and press
(
).
6
Connected device: Stop the
playback.
playback.
IMPORTANT
Video input that includes copyright signals
(for example, digital content designated as
“copy once” or copy protected) cannot be
recorded. The video input will be recorded
normally until the point a copyright signal is
detected.
“copy once” or copy protected) cannot be
recorded. The video input will be recorded
normally until the point a copyright signal is
detected.
Depending on the analog signal sent from the
connected device the input image may be
distorted or not be displayed at all (for example,
video input that includes anomalous signals
such as ghost signals).
distorted or not be displayed at all (for example,
video input that includes anomalous signals
such as ghost signals).
NOTES
We recommend powering the camcorder with
the compact power adapter.
the compact power adapter.
(
12)
FUNC.
(
31)
MENU*
LINE-IN MODE
Press (
) to display the
video input screen.
FUNC.
FUNC.
D119_NTSC-E.book Page 82 Monday, December 18, 2006 10:14 AM